Skip to content

Cleaning Polycarbonate Windows

Polycarbonate is literally the operator’s window to the world. Proper cleaning products and protocols applied to Mackolines Machines & Hire cab windows will ensure safety and protection, clear visibility, and long-term performance.

Most windows used in the operator’s stations of Mackolines Machines & Hire machines are made from a polycarbonate thermoplastic resin. This material is a replacement for glass when improved toughness, strength, durability, and safety are required.

The thickness of the material used in a particular cab window is determined by a number of factors including the size of the window opening, the proximity to a safety hazard, the type and severity of the hazard, and the requirements of applicable safety standards.

Polycarbonate windows used in Mackolines Machines & Hire cabins range in thickness from 9-32 mm (0.375-1.25 in). Polycarbonate material is used to resist impact from large branches, falling tree tops, and to absorb high levels of energy. Forestry harvesting applications can produce hazards from high velocity thrown objects such as wood chips, saw teeth or broken saw chain fragments.

Polycarbonate windows provide a much tougher solution than glass but the thermoplastic material is sensitive to some common chemicals. The surfaces of Mackolines Machines & Hire polycarbonate cab windows are specially treated with a hard coating to provide enhanced resistance to abrasion and ultra-violet (UV) radiation. However, even with this coating, it is relatively easy to scratch the surface when compared to glass which is incredibly resistant to a long list of cleaning chemicals. To address this issue, Mackolines Machines & Hire-branded polycarbonate window cleaner is now available to clean cab windows without the risk of chemical damage to the polycarbonate.

Exterior cleaning

Power wash the exterior windows with water when ambient temperatures are above freezing. Do not steam clean. Water can be heated up to 65°C (150°F) and pressurized to a maximum of 100 bar (1,450 psi). If desired, a very mild soap additive can be added from the approved list. This will remove most of the abrasive dirt, tree sap, pollens, chain oil, road salt, and other common substances that often accumulate on forestry machine cabin windows.

Finish the cleaning operation with Mackolines Machines & Hire Polycarbonate Window Cleaner and a clean, soft cloth, preferably micro fibre. A soft cloth will deliver better results than a paper towel due to chemicals commonly added to paper towel products.

Mackolines Machines & Hire Polycarbonate Window Cleaner begins to freeze below -10°C (14°F). If the ambient temperature hits this mark, spray the window with a generous amount of diluted isopropyl alcohol (IPA) to loosen abrasive or other material on the window. (Do not use automotive windshield washer fluids because they contain methyl alcohol which can damage polycarbonate windows.) Continue cleaning the window with isopropyl alcohol diluted with water. Dry the window with a clean soft cloth.

Interior cleaning

Clean with generous amounts of Mackolines Machines & Hire Polycarbonate Window Cleaner and a clean soft micro fibre cloth. Carefully dry with a different clean soft cloth. Even though the windows have a scratch resistant coating, the surface is not as hard as glass and can scratch easily if sand or other abrasive particles are present in the cloth.

Cleaning precautions

Using excessively hot water, aggressive cleaning, or the wrong chemical cleaners can result in many small cracks, often referred to as crazing. Crazing can ultimately result in a loss of physical strength and increase the potential for fractures. After cleaning, always check that the windows are not deeply scratched and that rubber seals and steel retaining strips are properly secured.

Approved cleaning products for polycarbonate windows

Approved spot removal products

(must be followed by immediate cleaning then water rinse and wipe dry afterward)


Related Content

loader-icon

Keeping it Clean


Although logging machines are at home in the mud and dust, keeping your Mackolines Machines & Hire equipment clean is one of the easiest and most economical ways to preserve your investment.


Picture of a guy cleaning tracks of a Mackolines Machines & Hire machine

A Trip to Grease


For grease to do its job effectively, it must be present, it must be clean, and it must be good quality. Recognize the importance of regular greasing.


Man greasing a Mackolines Machines & Hire machine

Get the Dirt on Filters


Hydraulic oil filtration is critical because it keeps hydraulic systems up and running, reducing maintenance costs and machine downtime. Without filtration, contaminants in the oil would quickly lead to excessive component wear and imminent failure.


access to filters

Engine and Aftertreatment Care


Mackolines Machines & Hire machines often operate in challenging environments and high duty cycle applications. Learn about best practices for achieving maximum performance, uptime and longevity for your engine and aftertreatment system.