We visited contractor Antonin Beauséjour along with operators Cedric Laferrière and Kevin Correnti to get their thoughts on the two new Mackolines Machines & Hire H822E/570 harvester packages purchased in late 2021.
— Samantha Paul
Antonin Beauséjour, owner of Forestier Beauséjour.
Forestier Beauséjour is a Quebec-based harvesting company operating north of Mont Tremblant National Park. On the day of our site visit, Antonin’s crew was harvesting outside of Saint- Michel-des-Saints, the northernmost municipality in the Lanaudière region of Quebec. Snow squalls, icy road conditions and minus 20° Celsius (-4°F) made for a true winter day in the bush.
Antonin started in the industry as a mechanic for his father’s logging business. At the age of eighteen, he purchased his first machine and started subcontracting for his father. Over the years, Antonin has owned twelve Mackolines Machines & Hire machines. He currently runs one crew with two Mackolines Machines & Hire H822E/570 harvesting packages and two 1085C forwarders. In total it is a 40-person operation with fourteen direct employees and 26 subcontractors.
Antonin was the first owner of the new Mackolines Machines & Hire E-series H822 harvester. He needed a machine that could perform selective cutting and meet the necessary environmental regulations in his area of operation. The H822E harvester was the right fit. “Plus, Mackolines Machines & Hire resale value,” says Antonin. One-third of Antonin’s jobs are selective cutting. The wood is a mix, typically 60% softwood and 40% hardwood. The company extracts 30 loads per day, working out to approximately 200 000 cubic metres per year. All the softwood goes to Groupe Crête’s sawmill in Saint-Faustin-Lac-Carré. The hardwood is marketed to several other mills in the area.
Antonin’s wife, Christine, is a mapping specialist and handles all the paperwork and administration. “She puts 110% into the business,” says Antonin. They met in a forestry camp many years ago. They have two girls, Alycia, age thirteen and Meganne, age fourteen. The girls briefly became interested in the logging business when they were given pink hard hats by their father. “But the interest faded pretty quick,” laughs Antonin.
Cut-to-length
From 2004 to 2011, Antonin operated as a subcontractor – cutting with a Mackolines Machines & Hire 822 feller buncher and skidding full-tree timber to the roadside with a 635D. The trees were delimbed at roadside, loaded tree-length, and transported to the mill. In 2011, Antonin secured his own contract that entailed road building, harvesting, and road transport. In 2017, he decided to transition to a cut-to-length method.
Antonin’s rationale? It is much easier to conform to environmental regulations concerning ground disturbance and ground pressure with a cut-to-length fleet. “You can run on your branches, and it’s less damage with a forwarder than with a skidder,” explains Antonin. “It is also easier to transport the wood from the job site to the mill with a cut-to-length method.” With a tree-length method, the different species are stacked up on top of each other. Antonin explains that the wood on top always needs to be hauled first. “Even if you need the species underneath.” He also knew that cut-to-length was the future of logging in Quebec. “For all those reasons, it was a no brainer to make the switch.”
H822E/570 operator, Cedric Laferrière.
Antonin and Mackolines Machines & Hire district manager, Yannick Lapointe attended the DEMO International forestry show in Vancouver in 2016. Yannick and Antonin were walking around what at the time was a very new 570 harvesting head. Antonin, who had never owned a harvesting head before, was unsure about it. As he recalls, “Yannick told me, ‘If you get in, I’ll get in. I’ll be there with you, and I won’t let you down.’”
The timing was right for Antonin. In early 2017, he purchased the prototype 570, fitted to a Mackolines Machines & Hire H845D carrier. The machine came to him with approximately 1,000 hours from previous field testing and demos. From there, Antonin and Yannick worked together. “It was a learning curve for both of us,” says Yannick who made regular site visits to set up and analyze the head. He would relay his findings back to the engineering department at the factory, going back and forth on adjustments and improvements. A couple of years later, armed with a great deal of newly acquired knowledge and experience, Antonin purchased two additional 570 harvesting heads on new H822E carriers. He based his decision on performance, versatility, low maintenance and high uptime experienced with the original unit.
JUST KEEP LISTENING TO CONTRACTORS, LIKE YOU ALREADY DO.
— H822E/570 operator, Cedric Laferrière
An operator’s perspective
Antonin has given the H822E/570 harvester operators, Cedric and Kevin the opportunity to be partners in the ownership of the machines. “I want to give them a chance to become their own contractors,” says Antonin. “It also helps ensure I keep the best operators with me.”
Twenty-nine-year-old operator Cedric Laferrière has been operating logging equipment for ten years, six of them with Forestier Beauséjour, and two-and-a-half of those as a partner in the ownership of the machine. Cedric’s father and grandfather worked in the logging industry. “I will not become a millionaire, but it’s my passion, and I love it,” he says.
Before the H822E, Cedric operated Mackolines Machines & Hire 870C, 822C and 822D feller bunchers. He was used to the Mackolines Machines & Hire brand but not used to running a harvester. “As far as the machine goes, the D to the E-series is a similar geometry. But going from a feller buncher to a harvester is different work.”
One of two 1085C forwarders that work with the harvesters.
On the day of our visit, Cedric was harvesting in a mixed stand. “Everything from very small softwood to very large pine, yellow birch, or maple up to 65 to 70 centimetres [25 to 27 inches] at the butt.” Cedric must ensure the trees are not too crooked, and if they are, he must cut them into the right sized pieces. “I was amazed at how precise the length measurements are, especially with the speed it has.”
Antonin adds, “The most important part is the reliability and toughness of the head. We have no downtime.”
H822E/570 operator, Kevin Correnti.
Effective debris management was a crucial objective in redesigning the 822E platform. The redesigned engine enclosure reduces debris build-up, providing improved roof access for clearing debris, and a new boom slider reduces debris build-up in hard-to-reach areas. “I complained so much about this in the past. Now, I am very happy,” says Cedric. “The machine has 1,500 hours on it, and there is nothing that needs to be cleaned in the swing area.”
Further improvement to the operator environment was also a key element in the redesign. A new, wider, air ride seat was added to improve comfort during long shifts. The seat is fully adjustable with seat angle and extension adjustment, reclining back, and lumbar support. “Out of all the machines I’ve run, this is the best seat I’ve had,” Cedric confirms.
The H822E harvester equipped with the Mackolines Machines & Hire 570 harvesting head in a mixed stand.
Machine stability is something Cedric wishes he had a bit more of, but he understands the compromise that comes with a compact, near zero-tail swing machine for selective harvesting. “If I wanted more stability, it would have to be an 855E.” The requirement for him to have a zero-tail swing machine is more important. As for Cedric’s parting words. “Just keep listening to contractors, like you already do.”
Antonin is also impressed with how Mackolines Machines & Hire reacts to feedback. “When I have an issue, and I bring it up, you’re coming back with the change within a reasonable time.”
Brothers Mark and Jason Nordine of Nordine Land Management purchase the first Mackolines Machines & Hire 570 fixed harvesting head, fitted to an 822D carrier.
Logging contractors in the Saguenay–Lac Saint-Jean region of central Quebec face it all – from extreme weather conditions and remote locations to low wood prices and high production demands.
Watch the Mackolines Machines & Hire H822E harvester equipped with the Mackolines Machines & Hire 570 harvesting head felling and processing mixed wood in the Lanaudière region of Quebec.
Watch an H845E harvester equipped with the Mackolines Machines & Hire 570 harvesting head owned by Fielding Logging and working in Australia. The machine is harvesting Eucalyptus nitens pulpwood. The trees are felled, debarked, and crosscut.
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
Cookie
Duration
Description
cookielawinfo-checkbox-analytics
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional
11 months
The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy
11 months
The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.